Walk behind asphalt milling machine

RoadHog hydraulic cool planers offer high manufacturing at a significantly less expensive of small, devoted milling machines. These machines are popular across the US and abroad by paving technicians and municipalities alike for tiny milling tasks, including pothole fix of city streets, removing failed pavement and milling curb lines prior to overlay.

Utility and pipeline contractors additionally utilize them to open trenches just before fixing or replacing gas, water or sewer lines cheaper per base versus a stroll at the rear of saw. Another advantage of using a RoadHog in this application usually each side of the trench is cut at the same time as the pavement is recycled on site hence getting rid of the need to load and truck the materials becoming recycled in other places at a fee. The savings in labor and fuel combined with the product, and that can be utilized immediately for backfill, will straight influence job earnings.

RoadHog cool planers can be found in cutting widths of 12 inches to 48 ins. The 12 and 16-inch broad standard flow models run on the skid steers auxiliary hydraulic system and gives a cutting level of 5 ins. Depth and tilt control tend to be manual, while sideshift is hydraulically controlled. Those consumers that will not need a top amount milling or own a higher flow skid steer, which can be needed for bigger cold planers with extra features, favor these devices.

High movement skid steer RoadHog cold planers could be offered in cutting widths of 16, 18, 24, 30, 40 and 48-inches. All feature planetary decrease drives, which efficiently provides optimum cutting torque under load. RoadHog can satisfy your milling requires regardless of the make & style of skid steer possessed. High flow cold planers is specified for 3-Line, single circuit procedure or 5-Line, dual circuit operation. In either case, all products incorporate electro-hydraulic control over depth, sideshift and tilt. This electro-hydraulic control is achieved through the joysticks of skid steer, a magnetic box or by RoadHog’s unique wireless remote-control choice.

RoadHog’s high circulation cool planers can be found as G5 or HD models. G5 designs feature independent level skis and a simple design that makes side-by-side lap slices fast and simple for any operator. G5 designs feature 6-inch level ability, whilst the HD models have 8-inch. HD models are available in 24, 30 and 40-inch variations. These devices feature a depth skid without independent level skis and a 1.5-inch dense drum wall suited to much more extreme milling circumstances.